← 返回更新日志

Qwen Code v0.21.0-nightly.20260727.c003e1718 预发布

2026-07-27 · GitHub 原文
* fix(cli): 在所有地方使用本地时间测量洞察天数和小时数 by @ComplexSimply in https://github.com/QwenLM/qwen-code/pull/7670 * refactor(autofix): 提取审查验证运行器 by @qqqys in https://github.com/QwenLM/qwen-code/pull/7644 * fix(ci): 当没有需要清理的内容时,不使分类清理失败 by @wenshao in https://github.com/QwenLM/qwen-code/pull/7688 * feat(core): 对齐 GenAI 内容遥测字段 by @doudouOUC in https://github.com/QwenLM/qwen-code/pull/7667 * fix(ci): 更新运行器活动 npm 前缀中的 qwen by @yiliang114 in https://github.com/QwenLM/qwen-code/pull/7689 * feat(core): 添加 Goal v3 运行时编排 by @qqqys in https://github.com/QwenLM/qwen-code/pull/7664 * test(web-shell): 在可视化套件中捕获 git 模式的新分支子状态 by @wenshao in https://github.com/QwenLM/qwen-code/pull/7672 * feat(triage): 停止代理内 CI 轮询,在 CI 完成后完成证据和审批 by @wenshao in https://github.com/QwenLM/qwen-code/pull/7693 * fix(acp): 在每个提示轮次结束时清理审查 worktree 租约 by @wenshao in https://github.com/QwenLM/qwen-code/pull/7694 * feat(serve): 暴露工作区 Channel 管理 API by @qqqys in https://github.com/QwenLM/qwen-code/pull/7637 * fix(core): 写入状态 sidecar,使模型不再误读静默后台 shell by @ComplexSimply in https://github.com/QwenLM/qwen-code/pull/7669 * fix(core): exit_plan_mode 返回 execute() 中的指导错误,而非权限拒绝 by @qwen-code-dev-bot in https://github.com/QwenLM/qwen-code/pull/7673 * fix(core): 在用户手动退出计划模式时告知模型 by @zjunothing in https://github.com/QwenLM/qwen-code/pull/7682 * fix(core): 为同一仓库的插件分配不同的扩展 ID by @zjunothing in https://github.com/QwenLM/qwen-code/pull/7676 * fix(core): 允许无需确认提示即可读取已保存的计划文件 by @zjunothing in https://github.com/QwenLM/qwen-code/pull/7678 * feat(web-shell): 添加只读 GitHub pull requests 面板 by @wenshao in https://github.com/QwenLM/qwen-code/pull/7683 * fix(cli): 当代理在轮次中间自动恢复时,清除过期的重试错误 by @qwen-code-dev-bot in https://github.com/QwenLM/qwen-code/pull/7681 * fix(mcp): 增强 OAuth 回调处理 by @gauravyad86 in https://github.com/QwenLM/qwen-code/pull/7510 * fix(web-shell): 为 GitHub PR 列表行添加 :focus-visible 轮廓 by @wenshao in https://github.com/QwenLM/qwen-code/pull/7704 * perf(cli): 在守护进程路由中缓存 GitHub PR 列表,TTL 为 60s by @wenshao in https://github.com/QwenLM/qwen-code/pull/7705 * perf(core): 将易变的自动记忆部分保留在系统提示词的末尾 by @DragonnZhang in https://github.com/QwenLM/qwen-code/pull/7651 * perf(web-shell): 在 git 状态完成前渲染 composer git chip by @wenshao in https://github.com/QwenLM/qwen-code/pull/7680 * fix(triage): 在补丁时通过标记解析阶段注释 ID,增强模型注入 by @wenshao in https://github.com/QwenLM/qwen-code/pull/7703 * fix(triage): 从 open-PR 列表而非提交关联中解析待完成的 PR by @wenshao in https://github.com/QwenLM/qwen-code/pull/7706 * feat(integrations): 添加仅检索的外部上下文搜索 by @doudouOUC in https://github.com/QwenLM/qwen-code/pull/7586 * feat(review): 为现有线程分类添加 comment-status 辅助函数 by @wenshao in https://github.com/QwenLM/qwen-code/pull/7690 * feat(review): 通过清理触发器强制执行仅提交的写入契约 by @wenshao in https://github.com/QwenLM/qwen-code/pull/7691 * fix(cli): 对齐行内数学公式识别 by @CubeLander in https://github.com/QwenLM/qwen-code/pull/7701 * feat(serve): 热重载工作区信任更改 by @doudouOUC in https://github.com/QwenLM/qwen-code/pull/7268 * feat(core): 配置流速率限制重试延迟 by @jay666mnj in https://github.com/QwenLM/qwen-code/pull/7674 * refactor(core): 通过单一分层构建器组装系统提示词 by @DragonnZhang in https://github.com/QwenLM/qwen-code/pull/7707 * feat(stats): 显示生成时间指标 by @destire-mio in https://github.com/QwenLM/qwen-code/pull/7677 * fix(desktop): 扩展 formatBytes 以支持 GB 以上单位,避免太字节大小渲染为 "undefined" by @chinesepowered in https://github.com/QwenLM/qwen-code/pull/7623 * fix(core): 在 toOpenAPI30 中将 const 派生的枚举转换为字符串 by @chinesepowered in https://github.com/QwenLM/qwen-code/pull/7547 * fix(core): 转换以 schema 关键字命名的属性的子模式 by @chinesepowered in https://github.com/QwenLM/qwen-code/pull/7546 * feat(channels): 采用通知唤醒架构的 GitHub 轮询适配器 by @OrbitZore in https://github.com/QwenLM/qwen-code/pull/7632 * feat(core): 配置流速率限制重试延迟 by @hogeheer499-commits in https://github.com/QwenLM/qwen-code/pull/7666 * fix: 屏蔽从无头 shell 终端泄漏的 xterm.js 解析器诊断信息 by @mvanhorn in https://github.com/QwenLM/qwen-code/pull/7663 * fix(review): 处理审查技能合并后的 P2 审查反馈 by @wenshao in https://github.com/QwenLM/qwen-code/pull/7708 * fix(core): 在循环检测提前返回时触发 StopFailure 钩子 by @qwen-code-dev-bot in https://github.com/QwenLM/qwen-code/pull/7592 * test(web-shell): 覆盖恢复历史分页重试 by @jay666mnj in https://github.com/QwenLM/qwen-code/pull/7657 * fix(web-shell): 为 worktree 会话启用 Changes 和 History 对话框 by @wenshao in https://github.com/QwenLM/qwen-code/pull/7695 * fix(cli): 严格解析 heatmapDays by @VectorPeak in https://github.com/QwenLM/qwen-code/pull/7218 * fix(acp-bridge): 提高 live journal 上限并作为守护进程配置暴露 by @wenshao in https://github.com/QwenLM/qwen-code/pull/7715 * fix(web-shell): 允许对辅助工作区会话进行固定和分组 by @wenshao 在 https://github.com/QwenLM/qwen-code/pull/7716 * fix(review): 在同账号写入时不要过度声明提交门控绕过 by @wenshao 在 https://github.com/QwenLM/qwen-code/pull/7718 * fix(qqbot): 恢复 AcpBridge 会话加载 — 返回输入 sessionId,修补 catch 路径 by @Eric-GoodBoy-Tech 在 https://github.com/QwenLM/qwen-code/pull/7722 * feat(skills): 添加可覆盖的默认禁用状态 by @samuelhsin 在 https://github.com/QwenLM/qwen-code/pull/7357 * fix(core): 防止更新扩展提供的代理 by @destire-mio 在 https://github.com/QwenLM/qwen-code/pull/7245 * fix(core): 当内置 ripgrep 无法运行时回退到系统 rg by @harjothkhara 在 https://github.com/QwenLM/qwen-code/pull/7203 * fix(core): 在 DashScope 思考过程中避免使用必需工具 by @hogeheer499-commits 在 https://github.com/QwenLM/qwen-code/pull/7661 * fix(channels): 在 GitHub 适配器中使用 username 作为 senderId 以修复白名单门控 by @OrbitZore 在 https://github.com/QwenLM/qwen-code/pull/7727 * feat(webui): 添加工作区 Channel 管理钩子 by @qqqys 在 https://github.com/QwenLM/qwen-code/pull/7728 * fix(web-shell): 在 parseAnsi 中解析 256 色和真彩色 SGR 序列 by @chinesepowered 在 https://github.com/QwenLM/qwen-code/pull/7620 * test(cli): 覆盖底部固定虚拟列表的行为 by @jay666mnj 在 https://github.com/QwenLM/qwen-code/pull/7652 * perf(core): 按需懒加载首次使用的依赖 by @doudouOUC 在 https://github.com/QwenLM/qwen-code/pull/7686 * fix(triage): 仅机器人自身的批准计为已批准 by @wenshao 在 https://github.com/QwenLM/qwen-code/pull/7737 * fix(core): 停止使用 humanReadableCron 命名永远不会发生的间隔 by @chinesepowered 在 https://github.com/QwenLM/qwen-code/pull/7529 * ci: 当 npm 无法响应时保持 critical-audit 门控的真实性 by @wenshao 在 https://github.com/QwenLM/qwen-code/pull/7743 * docs(channels): 记录循环和主动投递机制 by @wenshao 在 https://github.com/QwenLM/qwen-code/pull/7628 * feat(review): 将中等工作量重新定义为平衡的已验证通过 by @wenshao 在 https://github.com/QwenLM/qwen-code/pull/7733 * feat(review): 在测试覆盖率通过阶段对测试进行变异测试(Agent 5) by @wenshao 在 https://github.com/QwenLM/qwen-code/pull/7735 * feat(review): 将维护者审查视角引入代理简报 by @wenshao 在 https://github.com/QwenLM/qwen-code/pull/7736 * feat(web-shell): 持久化终端历史记录的分页错误 by @PratikWayase 在 https://github.com/QwenLM/qwen-code/pull/7709 * fix(cli): 在页脚更新后保持 IME 光标对齐 by @water-in-stone 在 https://github.com/QwenLM/qwen-code/pull/7711 * fix(core): 在批准 exit_plan_mode 后从历史记录中脱敏计划参数 by @zjunothing 在 https://github.com/QwenLM/qwen-code/pull/7197 * fix(review): 修正借用的视角和空测试严重程度(#7735/#7736 的后续) by @wenshao 在 https://github.com/QwenLM/qwen-code/pull/7746 * fix(core): 可靠地传递手动退出计划通知 by @doudouOUC 在 https://github.com/QwenLM/qwen-code/pull/7744 * feat(triage): 添加沙盒化的 /verify 深度验证通道 by @wenshao 在 https://github.com/QwenLM/qwen-code/pull/7710 * fix(review): 当计划省略 Han 标记时,从实时 PR 恢复双语语域 by @wenshao 在 https://github.com/QwenLM/qwen-code/pull/7739 * fix(cli): 补全重复的技能斜杠命令 by @Sparkle6979 在 https://github.com/QwenLM/qwen-code/pull/7720 * fix(cli): 处理行内数学公式周围的转义美元符号 by @CubeLander 在 https://github.com/QwenLM/qwen-code/pull/7741 * test(integration): 修复工具控制权限测试用例的不稳定问题 by @yiliang114 在 https://github.com/QwenLM/qwen-code/pull/7725 * revert: 移除 stale-base 恢复机制 (#7602) by @wenshao 在 https://github.com/QwenLM/qwen-code/pull/7640 * perf(cli): 替换 comment-json 设置解析器 by @doudouOUC 在 https://github.com/QwenLM/qwen-code/pull/7747 * fix(cli): 在多工具紧凑摘要中显示工具描述 by @ovochouovo 在 https://github.com/QwenLM/qwen-code/pull/7589 * fix(ci): 重命名 triage 状态标记以避免重复守卫冲突 by @yiliang114 在 https://github.com/QwenLM/qwen-code/pull/7723 * fix(core): 将无 ID 的连续块路由到冲突的工具调用打开器槽位 by @he-yufeng 在 https://github.com/QwenLM/qwen-code/pull/6981 * feat(review): 赋予验证器探测能力 — 运行可执行声明,而非仅读取 by @wenshao 在 https://github.com/QwenLM/qwen-code/pull/7756 * feat(core): 为子代理生成添加模型等级选择 (#7685) by @yiliang114 在 https://github.com/QwenLM/qwen-code/pull/7702 * fix(autofix): 回复每个审查线程,仅解决实际已修复的 by @wenshao 在 https://github.com/QwenLM/qwen-code/pull/7758 ## 新贡献者 * @jay666mnj 在 https://github.com/QwenLM/qwen-code/pull/7674 中首次贡献 * @harjothkhara 在 https://github.com/QwenLM/qwen-code/pull/7203 中首次贡献 * @PratikWayase 在 https://github.com/QwenLM/qwen-code/pull/7709 中首次贡献 * @Sparkle6979 在 https://github.com/QwenLM/qwen-code/pull/7720 中首次贡献 **完整更新日志**: https://github.com/QwenLM/qwen-code/compare/v0.21.0...v0.21.0-nightly.20260727.c003e1718